2014年5月28日星期三

Supply Fashion Tablet Alarm Stand Security Tablet Holder Stand




Model: KM-TA101






Product Application:
  • The security tablet holder, can be used for display of digital products such as tablet PC, Ipad, MP4, GPS, ebook and etc. It’s made up of bult-in alarm device, alarm probe, display rack and so on.
  •  It’s installed on the display rack or counter. The alarm probe is attached to the display product with 3m tape.
  • Clients can conveniently take off the display product from the rack and freely test and operate on the display product functions.
  • If the client wants to take away the display product, the alarm device will immediately give a continuously alarm until the the guard reset it with remote control.




Product Information:

 1>  This security tablet holder, high practical, the use of UV surface treatment technology, which greatly promoted the launching of experiential marketing have to promote improvement in performance and product security.

 2>  Now widely used in various types of mobile phones, cameras, MP4 and other Consumer Electronics products for Mobile phone supermarkets, used for loss prevention security of telecom mobile Unicom, digital city, digital camera counters, GPS counters, MP4 counters, appliances hypermarkets, supermarkets and various small electronic products exhibition of digital electronics.

 3>  It’s Upgrade the marketing model from the traditional "tell-style" to the innovative "experiential", consumers select products and convenient services from the staff "recommended style" which facilitate the consumers while improving business performance.

 4>  Customers can easily take down from the shelf displays, free to operate and feel the exhibits’ features, function and appearance. Anti-shoplifting display stand for cell phone is very convenient for consumers





Function of Security tablet holder:

Surface finished in UV Anti scratch processing technology, elegant appearance and high grade quality.

Low Voltage Alarm FunctionVoltage Less 3.3V Alarm, remind the charging
Automatic detection alarm functionAutomatic startup within 10 seconds if not Artificial starting up
Display Charging Function apply toMobile, Tablet PC
Host Base with Charging Function, Battery Standby Time2 weeks, Repeated use
Short Circuit Alarm FunctionShort-circuited, automatic alarm
Infrared Remote Control FunctionRemote Start and Disarm the Alarm.
Disconnection Alarm FunctionThree Contacts disconnection alarm

              

HTTP://WWW.360LONSAN.COM            
SKYPE: SECURITYDISPLAYSTAND
EMAIL:ALLY@HOLDERPROTECTION.COM

2014年5月27日星期二

New mobile phone security system with alarlm


Description:

 Cellullar phone display, can protect and display mobile with a standalone unit. It applies to cell phone supermarkets , telecom mobile unicom business hall, electronic digital city, digital camera store and all kinds of small and medium-sized electronic digital product exhibition hall of the security guard against theft. 





Security function :
  • Three Contacts disconnection alarm.
  • Short Circuit Alarm Function
  • Remote Start and Disarm the Alarm.
  • Password function,Change the password freely


Charging function:
  • Phone Charging and security by one cable.
  • Applies for Iphone and Samsung,interface optional
  • GB/EURO/ANSI/BS power plug available.







Technical Parameters:

Product NameCellular phone display mobile holder
Product Size100*65*150mm
Single Weight240g
Main MaterialABS/METAL
Shell Colorpearl white+black
Internal Battery type3.7V rechargeable lithium battery.
External Powe AdapterDC5V 1000MA
Battery Standby Time2 weeks
Charge indicatorCharging in red , full in green
Alarm Sound105DB
Alarm IndicationLED Red Flashes



Operation:
  1. Clean the display case, then turn on switch on the bottom of Hot security cellphone /mobile phone display holder /stand with charging and alarm host, adhere the bottom of the anti-theft frame with 3M adhesive tape to the exhibit cabinet. Or use two anti-theft screws to connect the cabinet frame and tighten the exhibition (open f the screw hole cover firstly).
  2. Connect the charger of Hot security cellphone /mobile phone display holder /stand with charging and alarm with the alarm host,the other end into the power socket in preparation for a fixed monthly charge.
  3. Tear off the 3 adhesive tapefrom the Anti-Theft Terminal product display and paste exhibit's back fastened.
  4. Tear off 3M adhesive from the sensor probe, stick tight with the obverse of the product.
  5. Take out the Infrared remote control board , tear off the battery insulation sheet underneath. Press the ON key, the host switch on ,enter the preset alarm status.
  6. The installation is set up.







HTTP://WWW.360LONSAN.COM            
SKYPE: SECURITYDISPLAYSTAND
EMAIL:ALLY@HOLDERPROTECTION.COM

New mobile phone security system with alarlm


Description:

 Cellullar phone display, can protect and display mobile with a standalone unit. It applies to cell phone supermarkets , telecom mobile unicom business hall, electronic digital city, digital camera store and all kinds of small and medium-sized electronic digital product exhibition hall of the security guard against theft. 





Security function :
  • Three Contacts disconnection alarm.
  • Short Circuit Alarm Function
  • Remote Start and Disarm the Alarm.
  • Password function,Change the password freely


Charging function:
  • Phone Charging and security by one cable.
  • Applies for Iphone and Samsung,interface optional
  • GB/EURO/ANSI/BS power plug available.







Technical Parameters:

Product NameCellular phone display mobile holder
Product Size100*65*150mm
Single Weight240g
Main MaterialABS/METAL
Shell Colorpearl white+black
Internal Battery type3.7V rechargeable lithium battery.
External Powe AdapterDC5V 1000MA
Battery Standby Time2 weeks
Charge indicatorCharging in red , full in green
Alarm Sound105DB
Alarm IndicationLED Red Flashes



Operation:
  1. Clean the display case, then turn on switch on the bottom of Hot security cellphone /mobile phone display holder /stand with charging and alarm host, adhere the bottom of the anti-theft frame with 3M adhesive tape to the exhibit cabinet. Or use two anti-theft screws to connect the cabinet frame and tighten the exhibition (open f the screw hole cover firstly).
  2. Connect the charger of Hot security cellphone /mobile phone display holder /stand with charging and alarm with the alarm host,the other end into the power socket in preparation for a fixed monthly charge.
  3. Tear off the 3 adhesive tapefrom the Anti-Theft Terminal product display and paste exhibit's back fastened.
  4. Tear off 3M adhesive from the sensor probe, stick tight with the obverse of the product.
  5. Take out the Infrared remote control board , tear off the battery insulation sheet underneath. Press the ON key, the host switch on ,enter the preset alarm status.
  6. The installation is set up.







HTTP://WWW.360LONSAN.COM            
SKYPE: SECURITYDISPLAYSTAND
EMAIL:ALLY@HOLDERPROTECTION.COM